Material Safety Data Sheet – AQL 50000 PlusTM
 
Company : AQUALINE (A div of KCH India Pvt Ltd)
Address  :

C-17, Ambattur Industrial Estate

 Ambattur Chennai – 600 058                         
 Tamil Nadu, South India

Tel No : 044-26256071 / 7499
Fax No : 044-42060489
Date of Issue : May 2009

IDENTIFICATION:

Product Name : AQL 50000 Plus
Chemical Family : ACRYLIC POLYER BLEND.
Hazardous material : Aminotri (Methylenephosphoric acid), Phosphorous Acid, Polyacrylic acid, Acrylic polymer, Sodium polyacrylate.
Non-Hazardous material : Protected under NJ trade

HEALTH HAZARD INFORMATION:

Acute – Swallowed (Short term exposure):
Skin contact: Causes irritation seen as redness and itching.  Eye contact: Cause irritation seen as tearing and redness. Inhalation: Causes respiratory irritation seen as coughing, sneezing and nausea.  Ingestion: Causes irritation with possible nausea, vomiting and diarrhea.

Chronic (Long term exposure) :
No human chronic effects known.  Medical conditions aggravated by exposure are pre-existing respiratory and skin conditions such as asthma. Emphysema and dermatitis. Target organs:  None known.  There is no primary route of entry into the body.  The primary route of exposure is skin and eye contact. 

First Aid
Inhalation:
Remove from the area to fresh air.  Seek medical attention if respiratory irritation develops or if breathing becomes difficult.
 
Eye:
Immediately rinse the eyes with water. Remove any contact lenses and continue flushing for at least 15 minutes.  Hold the eyelids apart to ensure. Rinsing of the entire surface of the eyes and lids with water.
Get medical attention if irritation persists.
 
Skin:
Wash affected area with large amounts of soap and water for 15 minutes.  Remove contaminated clothing and shoes.  Get medical attention if irritation persists.  Wash clothing and clean shoes before reuse.

Ingestion:

Give 3 to 4 glasses of water, but do not induce vomiting.  If vomiting occurs, give fluids again.  Seek medical attention if discomfort occurs.

Notes to Physician
Its no specific antidote.  Treat the patient symptomatically.

Swallowed:

Do not induce vomiting.  Give large quantities of water.  Seek medical help.

PHYSICAL DESCRIPTION/PROPERTIES:

Appearance : Light Amber Clear Non-viscous liquid
Odor :

Mild sweet.                       

Boiling Point : 220 degrees Fahrenheit
Vapor pressure : 15 mm Hg
Specific Gravity   : 1.103 at 25 degree Celsius
Viscosity : Non-Viscous
Flammability : Non-Flammable
Solubility in water : Complete
pH @ 100% : 3.260
Vapor density (Air: 1) : 0.6
Volatile by Volume : 90
Evaporation rate : 0.1

 

REACTIVITY DATA

Conditions to Avoid : None known.
Incompatibility :

Oxidizing agents such as Chlorine bleach and Hydrogen peroxide, strong bases.                                                           

Hazardous decomposition products : Hydrogen residues and Oxides of carbon and phosphorus.
Hazardous Polymerization : Will not occur.


SPILL OR LEAK PROCEDURES:
Steps to be taken if released / spilled:
Wear appropriate protecting clothing.  Use care as spills may be slippery. Dike and contain spill.
Absorb with an inert material and transfer all material into a properly labeled container for disposal.
Wear appropriate protective clothing.  Prevent product from contaminating soil or from entering sewage and drainage systems and bodies of water.  Flush area with water. 

Waste disposal method:
Dispose of in accordance with all local, state, and federal regulations.
Do not contaminate water, food or feed by storage or disposal waste resulting from the use of this product may be disposed of on site or at an approved waste disposal facility.

Neutralizing Agents:

Use sodium bicarbonate or soda ash.
Add cautiously while mixing.
Wear appropriate protective equipment.

SPECIAL PROTECTION INFORMATION:
Ventilation is recommended to control exposure from operations that can generate mists.
A NIOSH/MSHA approved respirator where misting exists.
Neoprene rubber of nitrile gloves should be worn.
For eye protection chemical goggles should be worn. 
Wear protective clothing when handling.

STORAGE AND HANDLING INFORMATION:
Storage and transport:
Maximum Storage temp: 120 degrees Fahrenheit
Minimum Storage temp:  34 degrees Fahrenheit

Store at moderate temperatures.

Precautions:
Keep from freezing. If product freezes allow it to slowly warm to room temperature and stir thoroughly before using.
Always store material in its original container.
Keep container tightly closed when not in use. 

Other Precautions:
Keep out of reach of children.
Read the entire label before using the product.
Follow the label directions.